Yamaha RX-V3200 Service Manual page 21

3. CS-YSS
8 channels are made usable by CS49329. The signal enters YSS938 through the Sub DSP passage and then undergoes
through-output.
YSS938 Main DSP is selected for the Main L/R output. Using the sub-menu, it is possible to select full bit output at 0dB
output level.
CS-YSS 0dB
CS-YSS FULL BIT
DSP THROUGH ~
CS-YSS (Analog)
(Use of CS-YSS is not available
due to restriction of the passage.)
A/D
Analog
Digital
DSP THROUGH ~
CS-YSS (AAC/dts (ES off))
Analog A/D
Digital
• The signal is output including the head margin.
Head margin:
Main L/R: -18dBFS, Center: -6dBFS, Rear Center: -3dBFS, FL/FR: -6dBFS,
RL/RR: -18dBFS, SWFR: Add L/R signal at -20dBFS.
Reference data (PRE OUT)
INPUT: DVD ANALOG
SWFR: 50Hz, Others: 1kHz
Condition
Both ch, -20 dBV, volume -10 dB -14.0 dBV -14.0 dBV -14.0 dBV -2.5 dBV -14.0 dBV
• The signal is output in digital full bit without including the head margin.
Reference data (PRE OUT)
INPUT: DVD ANALOG
SWFR: 50Hz, Others: 1kHz
Condition
Both ch, -20 dBV, volume -10 dB -14.0 dBV -8.0 dBV -11.5 dBV -2.5 dBV
CS49329
Main DSP
DIR
YSS938
CS49329
dts/AAC
DIR Main DSP
YSS938
MAIN L/R CENTER REAR C
MAIN L/R CENTER REAR C
Through
Sub DSP
Through Through
Sub DSP
Through Through
RX-V3200/DSP-AX3200
SWFR RL/RR
SWFR RL/RR
-2.0 dBV
L/R
C
RC/SW
FL/FR
RL/RR
L/R
C
RC/SW
FL/FR
RL/RR
20