Polaris Outlaw 9922079 Owner's Manual page 146

Throttle Cable Freeplay Adjustment
WARNING
Improper adjustment of throttle cable freeplay can result in loss of control, which could result in serious
injury or death. Polaris recommends that this procedure be performed by a Polaris dealer to ensure
that it's done correctly. Mechanically knowledgeable persons who perform this procedure must follow
the adjustment procedures exactly.
1. Locate the throttle cable adjuster at the handlebar.
2. Squeeze the end of the rubber boot and slide it far
enough to expose the end of the inline cable adjuster.
3. Loosen the adjuster lock nut.
4. Rotate the boot to turn the adjuster until 1/16" to 1/8"
(1.5-3 mm) of freeplay is achieved at the thumb lever.
While adjusting freeplay, be sure to flip the throttle
lever back and forth.
5. Tighten the lock nut.
6. Squeeze the end of the rubber boot and slide it over
the cable adjuster to its original position.
Maintenance
Boot
Adjuster
Lock Nut
143