Polaris Outlaw 9922079 Owner's Manual page 131

Polaris industries 2009 all-terrain vehicle owner's manual
Table of Contents

Advertisement

Maintenance
Vehicle Immersion
6. Press and hold the starter button for 10 second intervals for about one minute or until
water vapor is no longer ejecting from the spark plug hole.
7. Check the oil level. If the level is higher than the pre-ride inspection level, water has
entered the crankcase. Do not start the engine. Transport the vehicle to your dealer for
inspection and service. If the oil level is unchanged from the pre-ride inspection level,
replace the spark plug, start the engine and move the ATV promptly to a trailer or towing
vehicle.
NOTICE: If water isn't removed promptly from a submerged ATV, rust will form in precision
components, gears, bearings, the cylinder and other areas and result in serious engine
damage. Always see your dealer promptly after an ATV has been submerged.
128

Advertisement

Table of Contents
loading

This manual is also suitable for:

2009 outlaw 525 irs

Table of Contents