Polaris Outlaw 9921123 Owner's Manual page 182

Cleaning
Washing the Vehicle
If a high pressure water system is used for cleaning (not recommended), exercise extreme
caution. The water may damage components and could remove paint and decals. Avoid
directing the water stream at the following items:
• Wheel bearings
• Electrical components and wiring
• Transmission seals
NOTE:
If warning and safety labels are damaged, contact your Polaris dealer for free replacement.
Grease all zerk fittings immediately after washing. Allow the engine to run for a while to
evaporate any water that may have entered the engine or exhaust system.
• Brakes
• Cab and body panels
• Labels and decals
Maintenance
179