Polaris Outlaw 9921123 Owner's Manual page 151

Maintenance
Battery Charging (Sealed Battery)
On a sealed battery, the sealing strip cannot be removed. Use a voltmeter or multimeter to
measure DC voltage. A fully charged battery will register 12.8 V or higher. If the voltage is
less than 12.8 volts, recharge the battery.
The battery may be recharged without removing
it from the vehicle. Use the remote charging ter-
minals under the right front cab.
NOTE:
The Polaris Battery Tender battery charger
can be left connected during the storage
period and will automatically charge the
battery if the voltage drops below a pre-
determined point.
NOTE:
If the battery fails to recharge during vehicle
operation, check voltage regulator connec-
tions. See your Polaris dealer for inspection
of the voltage regulator and generator.
148
Charging
Terminal