Foscam FN3104H User Manual page 59

NVR User Manual
If you want to define or change the cruise trace, please go to Parameter Configuration > Service
configuration > Preset Settings.
How to do cruise?
Select one track in the track drop-down list.
Step1
Click
Step2
Click
Step3
Preset Settings
The default preset position is TopMost, BottomMost, LeftMost, RightMost, you can add other preset
positions.
Add: Click this icon to save the position you need the IP camera to remember.
Delete: Select one preset position and click this button to delete it.
GO: Select one preset position in the preset drop-down list and click Go to make the IP
camera move the preset position.
How to do preset position?
Rotate the IP camera and stop at a desired place where you want make preset position.
Step1
click
Step2
cannot contain special characters. Then click
position, click
You can move the IP camera and stop at another place, and set another preset position. You
can do all the preset positions with this method.
If you want to see one preset position you have set, only select the preset position name from
Step3
the preset drop-down list, and click
www.foscam.com
, the IP camera will cruise following the predefined path.
and finish cruising.
button and input a descriptive name for the preset position. The preset position
.
to save it. If you want to reset the preset
button, the IP camera will go to the preset position.
53