Clarity C460 User Manual page 25

MEnU oPErATionS
backlight Time
This option controls how long the screen stays lit after pressing a button on the
handset. The default time set is ten (10) seconds. Press the UP or DOWN arrows
to increase or decrease the number of seconds. After the desired time is entered,
press the MENU key to save and complete the change. A tone will sound to signify
the completion and the display will go back to the Setup menu.
Area Code
In some areas the entry of the local area code is necessary to enable the phone to
dial directly from Caller ID. If unable to dial from the Caller ID screen, please check
with the local telephone service provider to see if this is required. After pressing
MENU to select this option, "Area Code" will appear. Enter the three (3) digit area
code using the dial pad. After ensuring it is correct, press the MENU key to save the
entry and complete the process. A tone will sound to signify the completion and the
display will go back to the Setup menu.
Dial Mode
This setting changes the phone dialing mode between Tone and Pulse dialing. The
default setting is Tone. Use the UP or DOWN arrow keys to toggle between the
two options and press the MENU key to select the desired option. A tone will sound
to signify the completion and the display will go back to the Setup menu. The phone
will have to be set to tone to be compatible with automated telephone systems.
note: While in Pulse mode, press the Star (*) key to temporarily change to the
Tone mode until the call ends.
AutoTalk
When turned on, this allows the phone to automatically answer every time it is re-
moved from the base and automatically ends a call when it is placed back in the base.
The default setting is Off. Use the UP or DOWN arrow keys to toggle between
On/Off and press the MENU key to select the desired option. A tone will sound to
signify the completion and the display will go back to the Setup menu.
Flash Time
This setting changes the length of the delay of the Flash key used to switch between
lines. The options are Short, Medium, and Long. The default is set to Medium,
which is the setting required for use in the United States and Canada. Use the UP or
DOWN arrow keys to move between the options and press MENU to select the
desired one. A tone will sound to signify the completion and the display will go back
to the Setup menu.
25