Advertisement
Now comes the part you've been waiting for – it's time to use your Easy Spray
use your steam mop for the first time or haven't used the unit in awhile, it may take a minute or two
for the water to make its way through the pump and into the heater to create steam. Get it started
by pumping the handle a few times. If you've waited a few minutes and you still don't see any steam,
reference the troubleshooting section on page 8.
IMPORTANT: Your Easy Spray
needs water to make steam! Never use your Easy
Spray
Steam Mop without water in the tank.
™
Sweep or vacuum your floors before using your
Easy Spray
Steam Mop. Your Easy Spray
™
Mop was designed to get rid of stuck-on gunk,
grime, paw/footprints and it will do a better job
if yesterday's cereal crumbs aren't in the way.
fig. 5
Steam Mop
™
Steam
™
steam mop. When you
™
Visit www.sharkclean.com for other great
quick cleaning products to complement your
Easy Spray
Steam Mop.
™
1
Pull and twist the quick release cord holder to
unwrap the power cord completely. Plug into an
electrical outlet. The LED light around the Shark
logo will turn on. Success! If your light doesn't
turn on reference the Troubleshooting section on
page 8. (fig. 5)
www.sharkclean.com
®
5
Advertisement
