fig. 3
ATTACHING THE CLEANING PAD
cleaning
1
Place the
logo side facing up. Place the Easy Spray
Mop on the top of the pad to attach. (fig. 3)
IMPORTANT: Only add water to the tank.
Chemicals or cleaning solutions may be unsafe
or cause damage.
IMPORTANT: Please wait 3-5 minutes for
your Easy Spray
Steam Mop to cool off before
™
cleaning
removing the
pad on the floor with the
Steam
™
pad.
NOTE: Don't be alarmed if the first time
you use your Easy Spray
notice water inside the water tank or drops
of water in the packaging. It's normal to
see this water. Your Easy Spray
was 100% tested in the factory to ensure
your safety and your floor's happiness. If
you see water in the unit, it's from these
tests.
Replacement cleaning pads are available
at www.sharkclean.com or by calling
1-800-798-7398.
www.sharkclean.com
Steam Mop, you
™
Steam Mop
™
3