Table of Contents
Advertisement
Keypad Tones
When the keypad tone is set on, you will hear a confirmation tone
each time you press any keys.
→
"Settings"
"Profiles"
1.
Highlight the profile you wish to customise.
2.
Press [Options] and select "Personalise".
3.
Select "System Sounds".
4.
Select "Keypad Tones".
5.
Highlight the desired tone pattern.
6.
Press [Options] and select "Assign".
Vibration
→
"Settings"
"Profiles"
1.
Highlight the profile you wish to customise.
2.
Press [Options] and select "Personalise".
3.
Select "Vibration".
4.
Select "On", "On & Link to Sound" or "Off".
Tip
• When the "On & Link to Sound" option is selected in step 4, the
vibrator synchronises with your selected melody to pulse in time
with the melody. Please note that not all melodies support the "On
& Link to Sound" option.
• When you select "On" or "On & Link to Sound" in step 4, "
displayed in standby.
Any Key Answer
You can answer a call by pressing any key except F,
[Busy]. For details, see page 24.
"Settings"
1.
Highlight the profile you wish to customise.
2.
Press [Options] and select "Personalise".
3.
Select "Any Key Answer".
4.
Select "On" or "Off".
Setting the Display
You can change the settings of the display.
Setting the Wallpaper
For the standby screen, 5 pictures are provided.
Pictures taken with the digital camera or images downloaded from a
WAP site can be used for wallpapers.
To Set My Pictures
"Settings"
1.
Select "My Pictures".
2.
Select the desired picture.
3.
After displaying the picture, press
Note
• Some pictures cannot be used because of their picture and data
types.
• If the picture in My Pictures is already set, it is displayed in step 1.
Press [Change] and select the desired picture.
" is
, U and
→
"Profiles"
(M 12-2)
(M 12-2-1)
→
→
"Display Settings"
"Wallpaper"
.
Settings
95
Advertisement
Table of Contents
