Security - Sharp 703SH User Manual

→
"Settings" "Video Call Settings"
Quality"
1.
Select from "Normal", "Quality Prio." or "Frame Rate Prio.".
Select "Frame Rate Prio." to perform faster communication.
Backlight (M 12-7-5)
With this setting On, the phone's backlight is on when making a video
call.
→
"Settings" "Video Call Settings"
1.
Select "On", "As Normal Setting" or "Off".
The "As Normal Setting" option depends on the backlight setting
of the main display (p. 97).
Mute (M 12-7-6)
You can mute the microphone while making a video call.
→
"Settings" "Video Call Settings"
1.
Select "On" to mute or "Off" to cancel mute.
Assigning Hold Guidance Picture
You can display an image saved in the phone on your main display
while you are putting a call on hold.
→
"Settings" "Video Call Settings"
1.
Select "Preset Picture" or "My Pictures".
2.
Select the desired picture.
104 Settings
→
"Outgoing Picture
→
"Backlight"
→
"Microphone"
(M 12-7-7)
→
"Hold Guidance Pict"

Security

(M 12-8)
Enabling/Disabling the PIN Code
If the PIN code is enabled you are asked to enter the PIN code each
time the phone is switched on. Your PIN code is registered on the
SIM/USIM card and you should have been made aware of the code
when you purchased the SIM/USIM card. Contact your service
provider for further details.
→ →
"Settings" "Security"
1.
Select "On" to enable the PIN code or "Off" to disable.
2.
Enter your PIN code.
Note
• If you enter the wrong PIN code three times in step 2, the SIM/USIM
card will lock. To remove the lock, contact your service provider/
SIM/USIM card vendor.
To Change the PIN Code
This allows you to change the PIN code registered on the SIM/USIM
card. Before you change the PIN code, select "On" in step 1 in
"Enabling/Disabling the PIN Code".
→ →
"Settings" "Security"
1.
Enter the existing PIN code.
2.
Enter a new PIN code.
3.
Enter the new PIN code again.
(M 12-8-1)
→
"PIN Entry" "Switch On/Off"
→
"PIN Entry" "Change PIN"