Infrared - Sharp 703SH User Manual

To Switch the Handsfree Settings
You can switch modes of the handsfree kit between two modes;
talking with the handsfree kit or talking with the phone.
→
"Connectivity" "Bluetooth"
"Handsfree Setting"
1.
Select "Private mode" or "Handsfree mode".
"Private mode": For talking with the handset
"Handsfree mode": For talking with the handsfree kit
To Turn the Authentication Request On or Off
You can request the sender or receiver of the OBEX data to
authenticate the passcode (exchanging the passcode) before pairing
devices.
→
"Connectivity" "Bluetooth"
"Authentication"
1.
Select "On" or "Off".
Note
• No authentication is required for the paired devices.
• Even if you select "Off", you may authenticate the passcode when
the sender requests it.
To See Your Phone Details
→
"Connectivity" "Bluetooth"
"My Phone Details"
→ →
"Bluetooth Settings"
→ →
"Bluetooth Settings"
→ →
"Bluetooth Settings"

Infrared

(M 10-2)
In order to use the infrared function, you need to search for other
infrared enabled devices to establish contact with your phone. Keep
your phone within a distance of 20 centimetres before searching. The
infrared setting will return to off when no data is transmitted/received
via infrared communication.
To Turn On or Off (M 10-2-1)
→
"Connectivity" "Infrared"
1.
Select "On" or "Off".
The infrared setting is activated, and "
To Send All Data to Other Devices
→
"Connectivity" "Infrared"
1.
Enter your handset code.
The default handset code is "9999". For details on changing the
handset code, see "To Change the Handset Code" on page 105.
2.
Select the desired data to send.
3.
Enter the authorisation code.
→
"Switch On/Off"
" is displayed.
(M 10-2-2)
→
"Send All"
Connectivity 111