Options; Advanced Call Functions; Call Waiting; Conference Call - JabloCom JabloPhone GDP-04i User Manual

If you want to enter a DTMF command only, it must be iniciated by a "P" character. Example: P*2121481#.

Options

Some special functions are selectable under the
 Silent mode / Normal mode
This function allows switching to the silent mode where all sound alerts and rings are disabled. This allows a user to
stay connected to the network while not being disturbed by incoming calls or text messages.
 Switch Off
This function turns off the phone. When turned off, the phone cannot make or receive any calls or text messages.
The battery charging function is active whenever the power adaptor is connected, even when the phone is
switched off. The battery charger progress indicator on the display will be active when the phone is off, if the
battery is charging.
The phone can also be switched off by pressing
In order to switch the phone back on, press and hold
on the display.
The phone will start automatically when the power cable from the adaptor is re-connected into the
phone.
EN
 Travel mode Off
This feature ensures that the phone will not be switched on accidentally. Travel mode is active only when the phone
is powered from the battery only.
To switch the phone on again from the travel mode, press and hold
type the word "START" on the character keyboard or connect the power adaptor again.
 Cell lock
If the cell lock function is available on your network and your GSM service provider activated it on your SIM card, you
can see a icon while connected within the home location.

Advanced call functions

Some of the advanced call functions will not work properly unless they are supported by your GSM
operator.

Call Waiting

The call waiting function indicates an incoming call even when another call is in progress.
To use the call waiting function, please check that you have activated it in the GSM network setting –
see chapter Settings.
If a new incoming call is indicated, press
Switc h
function by using the selection key. The first call is put on hold. To switch between the calls press
again. Either call can be canceled by

Conference Call

The conference call function is a network service that allows up to six people to take part in a conference call.
To arrange a conference call:
• Establish a call to the first participant
• To add new participant into the conference call enter the phone number directly and press
contact from phonebook and press the
O p tions
pressing the
• When the new call has been answered, press
on the display.
• To add another participant to the conference call, repeat the previous steps. The maximum number of remote
parties is 5.
xXC_GDP-04i.ENG.MAN.Manual.10.C
O p tions
to answer the waiting call. Also you can select
.
S elec t
selection key and then the
O p tions
menu in the normal operating mode.
for more than 3 seconds.
T he phone is s t ar tin g...
until "
until the red light is activated and then
selection key. You may put the first call on hold if you want by
H ol d
selection key.
Join c all s
and . The message
- 6 -
" message appears
O p tions
and
or select the
C onferenc e
appears