Firmware Update; Pc-Fax; Connecting An Analog Phone (Gdp-04Ai Only); Troubleshooting - JabloCom JabloPhone GDP-04i User Manual

Firmware update

GDP-04i offers an opportunity to upgrade the phone firmware through the Internet from JABLOCOM update server.
Availability of a new firmware may be checked by JabloTool automatically or user can perform a manual check. If
there is a new firmware available, you can update your phone using the Update Tool, an integrated part of JabloTool.
Highlight the phone within the device list and click the right mouse button. Choose
menu. We recommend synchronizing your GDP-04i's phonebook with the PC phonebook (JabloTool or e-mail client)
prior performing the update.
Warning:
update to prevent possible data loss!
UpdateTool will offer you all firmware versions available for your phone. Choose Bootloader, Software and the Lan-
guages you want to upload into your phone and select
as soon as the upload is finished.

PC-fax

You can use the GDP-04i as a PC-fax for sending/receiving your faxes from/to your PC.
To use the GDP-04i as a PC-fax, you have to install fax service (optional component of Microsoft Windows installa-
tion). This will add FAX as printing device in the list of your printers. Open properties of FAX and select GDP-04i as a
device for sending/receiving faxes during installation of a fax feature of your operating system.
To activate automatic receiving of incoming faxes you have to set-up Fax Console (Start/All Programs/Accessories/
Communications/Fax/Fax Console).
EN
Warning:
service provider.

Connecting an analog phone (GDP-04Ai only)

The GDP-04Ai offers you the possibility to connect a standard analog phone.
This feature allows you to operate an analog phone in a similar way as if it is connected to a standard fixed line net-
work (PSTN), but over a GSM network.
You can dial a number from the GDP-04Ai as well as from the analog phone. They can not be used simultaneously.
The call is executed through your GSM connection in both cases.
An incoming call rings on the GDP-04Ai as well as on the attached analog phone. The user can answer the call from
either phone.
To switch an ongoing call from the GDP-04Ai to the attached analog phone, press the "Space" key (on the character
keyboard). You will hear the ringing signal of three short beeps. You will be disconnected once the analog phone
answers the call. You may hang up now.
To switch an ongoing call from the attached analog phone to the GDP-04Ai, press the FLASH on the phone, wait for
the call to be answered on GDP-04Ai and then hang up.
Only one phone or master PBX line (home exchange unit) can be attached.
Warning:

Troubleshooting

JABLOCOM is improving the GDP-04i phone software as well as the JabloTool call management software continu-
ously. If you find an incorrect phone behavior, please check if you use the latest available firmware version within the
JabloTool (menu Tools, Update Firmware). Detail update instructions as well as the latest JabloTool version you can
find on our website - www.jablocom.com/download.
Problem / Error message
No SIM card
Registration to network failed!
Function execution failed
USSD code refused by network
Unable to process
xXC_GDP-04i.ENG.MAN.Manual.10.C
Synchronize your GDP-04i's phonebook data with PC before starting of firmware
Digital fax function may not work properly unless it is fully supported by your GSM
Never connect the GDP-04Ai into a wall socket of a fixed line network (PSTN).
Solution
Your SIM card is not placed in the SIM holder correctly or the phone does not support your SIM card type.
Check if the SIM card is placed in the holder correctly or contact your GSM service provider.
The network refused to register your SIM card into the network. Contact your service provider.
The network did not correctly perform the USSD command you sent. Check the command syntax or contact
your service provider.
The network refused the USSD command during USSD dialog. Repeat sending the command or contact your
service provider.
There is a conflict between your request and the current phone status, for example during phonebook
import from SIM. Repeat your request.
A pply
. The phone will automatically switch to standby mode
- 12 -
Up date Firmware
from the