Configuring Wireless Security Using Wps - D-Link DSL-2750E User Manual

Configuring Wireless Security Using WPS

There are two WPS methods for creating a secure connection.
Push Button Configuration (PBC) : create a secure wireless network
-
simply by pressing a button
PIN Configuration : create a secure wireless network simply by entering a
-
wireless client's PIN(Personal Identification Number)
Push button Configuration(PBC)
1. Make sure that your DSL-2750E is turned on and that it is within range of
your computer and Wireless LAN Security Mode is No Security or WPA-
PSK or WPA2-PSK.
2. Make sure that you have installed the wireless clients driver and utility in
your notebook.
3. In the wireless client utility, find the WPS setting. Enable WPS and press
the WPS button.
4. Go to WPS Station Page and press the Push Button or Press WPS/WLAN
button 5-10 sec.
5. Press WPS button on your Wireless client within 2 minutes.
PIN Configuration
When you use the PIN configuration method, you need to use both DSL-2750E
configuration interface and the client's utilities.
16