Setting Presets - Uconnect 7.0 Owner's Manual Supplement

Direct Tune
Press the "Tune" button on the touchscreen located at the
bottom of the radio screen. The Direct Tune button on the
touchscreen is available in AM, FM and SXM radio modes
and can be used to direct tune the radio to a desired station
or channel.
Press the available number button on the touchscreen to
begin selecting a desired station. Once a number has been
entered, any numbers that are no longer possible (stations
that cannot be reached) will become deactivated/grayed
out.
Undo
You can backspace an entry by pressing the bottom left
"Undo" button or the button on the touchscreen.
OK
Once the last digit of a station has been entered, press the
OK button and the Direct Tune screen will close and the
system will automatically tune to that station.
The selected Station or Channel number is displayed in the
Direct Tune text box.

Setting Presets

The Presets are available for all Radio Modes, and are
activated by pressing any of the six "Preset" buttons on the
touchscreen, located at the top of the screen.
When you are receiving a station that you wish to commit
into memory, press and hold the desired numbered button
on the touchscreen for more than two seconds or until you
hear a confirmation beep.
The Radio stores up to 12 presets in each of the Radio
modes. A set of 6 presets are visible at the top of the radio
screen.
You can switch between the two radio presets by pressing
the "arrow button" located in the upper right of the radio
touchscreen.
Browse In AM/FM
When in either AM or FM, the Browse Screen provides a
means to edit the Presets List and is entered by pushing the
ENTER/BROWSE button.
UCONNECT 7.0 15
3