Aztec PROSCRUB Owner's Manual page 8

DRAINING AND FILLING THE TANKS continued
DRAINING THE PROSCRUB SOLUTION TANK:
1.) Make sure Solution Control Knob is completely turned to OFF position
2.) Pull clear hose off bracket at back of the machine and drain into a bucket or into floor drain
3.) Turn Solution Control Knob clockwise to clean out solution flow system
4.) Rinse solution tank with clean water through Black Drain Hose
5.) Reconnect Black Drain Hose to bracket securely; make sure it is tightly connected
FILLING THE PROSCRUB SOLUTION TANK:
1.) Make sure Solution Control Knob is completely turned to OFF position
2.) Fill the tank with up to 14 gallons of water and chemical solution
3.) The Clear Fill Indicator Hose can be used as a fluid fill indicator level if it is unplugged and held at
the same height as if plugged in
4.) If the Clear Fill Indicator Hose has been used as a fluid fill indicator, plug it back in when tank is
being filled
VACUUM &
BRUSH MOTOR
SWITCHES
SQUEEGEE
LIFT LEVER
FOOT PEDAL
LEVER
FOOT
PEDAL
CLEAR FILL
INDICATOR HOSE
SQUEEGEE
08-2017
PROSCRUB OWNER'S MANUAL PAGE 8
SOLUTION CONTROL
KNOB
CONTROL
PANEL CRADLE
BLACK DRAIN
HOSE
VACUUM
HOSE
ROD