Cleaning And Preservation; Controls And Linkage - Polaris 600 EDGE Touring 121 Owner's Manual

Suspension Maintenance
Loose nuts and bolts can reduce your snowmobile's reliability and
cause needless repairs and down time. Before beginning any
snowmobile trip, a visual inspection will uncover potential problems.
Check the following items on a weekly basis or before any long trip:
n Check suspension mounting bolts for tightness.
n Check rear idler wheel bolts for tightness. See page 121 for torque
specs.
n Check rear idler adjusting bolt locknuts for tightness.
n Check front torque arm limiter strap condition.
n Check slide rail, Hi-fax condition greatly affects performance.
Have your dealer replace when worn to minimum thickness.
n Check track tension (beginning on page 121).
n Lubricate/grease all suspension components (see page 87).
n Check ski runner/skag condition.
n Check ski spindle bolts for tightness.
n Check tie rod end nuts for tightness.
Extended Storage
Off-season or extended storage of your snowmobile requires preventive
measures to aid against deterioration and to prolong the useful life of
many components.

Cleaning and Preservation

Proper storage starts with cleaning, washing, and waxing the hood,
chassis, and plastic parts. Wipe down remaining surfaces with a damp
cloth. Clean and touch up with paint any rusted or previously painted
surfaces. Be sure that corrosive salt and acids are removed from
surfaces before beginning preservation with waxes and rust inhibitors
(grease, oil or paint).
The machine should be stored in a dry garage or shed, out of direct
sunlight, and covered with a fabric snowmobile cover. Plastic tarp may
cause condensation to form and damage snowmobile components.

Controls and Linkage

All bushings, spindle shafts, tie rod ends, and cables should receive a
light coat of oil or grease.
MAINTENANCE
127