Step 14
YB24
(6)
1
Place panels according to the
diagram below. Ensure that the ends
of the panels with the slotted holes
are at the same end with the slot to
the outside of the fi nished assembly.
Place the translucent panel over the
steel panel so that the three sets of
holes align. Fasten the two panels
together with bolts and washers from
the top and nuts underneath. Make
(2) assemblies.
SLOT
Parts Needed For
Skylight Roof Panel Assembly
Part #10553
27
10927 Translucent Panel (2)
10553 Partial Roof Panel (2)
SLOT
Part #10927