bem wireless Eclipse User Manual page 9

Getting Started (cont.)
Step 2: Set alarm time and sound mode
Set the alarm time and the sound mode of the activated
alarm (1 or 2). (You cannot set the alarm if Alarm 1 and 2 are
both activated or both off.)
1. Press to begin setting your alarm. The hours blink on
the LCD screen, press + / - to adjust the hour.
2. Press a 2nd time, the minutes blink on the LCD screen,
press + / - to adjust the minutes.
3. Press
a 3rd time,
+ / - to shift between turning the light on or off when the
alarm sounds. (A blinking
become bright when the alarm goes off.
4. Press and hold
settings.
The alarm lasts for 3 minutes. Press any button on the front of the
speaker to silence it. Note that the light stays on.
Using the Snooze Function
When the alarm sounds, press down on the light to activate the
snooze function, which postpones the alarm for 9 minutes. (The
snooze function only works once the alarm starts.)
flashes on the LCD screen, press
indicates the light will slowly
for 3 seconds to confirm the alarm
9