Turning Functions On/Off; Owncal Calorie Counter On/Off; Fitness Test On/Off; Predicted Maximum Heart Rate On/Off - Polar Electro S810 User Manual

Turning functions on/off

1. In the Time of day display scroll up or
down until OPTIONS is displayed.
2. Press OK to enter the Options mode.
EXERCISE SET is displayed.
3. Scroll up or down until
FUNCTION SET is displayed.
4. Press OK to start the function settings. OwnCal is displayed.
To set the following functions on you have to set your user information.
If kg/lbs are displayed as you start setting the function on, the wrist
receiver points out that you have not set your all user information.

OwnCal calorie counter on/off

If you start from the Time of day display, repeat steps 1-4.
5. Press OK to start setting the OwnCal function. On/OFF starts to flash.
6. Scroll up or down to set the OwnCal on or off. Press OK.
For getting the most accurate OwnCal results, update the VO
and the HR setting with clinically measured values (if available). If you do
max
not know your clinically measured values perform Polar Fitness Test and
update the OwnIndex and HR -p settings in Fitness Test mode.
max

Fitness test on/off

If you start from the Time of day display, repeat steps 1-4.
5. Scroll up or down until Fit. Test is displayed.
6. Press OK to start setting the fitness test. On/OFF starts to flash.
7. Scroll up or down to set the fitness test on or off. Press OK.
S810_manual_GBR _A.pm6 32-33
Options
Function Set
OwnCal Fit. Test HR -p Online
max
On/OFF On/OFF On/OFF On/OFF
setting
2max
B 32
Predicted maximum heart rate on/off (HR
If you start from the Time of day display, repeat steps 1-4.
5. Scroll up or down until HRmax-p is displayed.
6. Press OK to start setting the HR -p. On/OFF starts to flash.
max
7. Scroll up or down to set the HR -p on or off. Press OK.
max
HR -p can be turned on only if Polar Fitness Test is on.
max

Online recording to computer on/off

If you start from the Time of day display, repeat steps 1-4.
5. Scroll up or down until Online is displayed.
6. Press OK to start setting the online recording. On/OFF starts to flash.
7. Scroll up or down to set the online recording on or off. Press OK.
To use this function you need an optional Polar IR Interface.
To continue your settings, press the stop button or to return to the Time of
day display, press and hold the stop button.
B 33
8/3/01, 14:16
-p)
max