Table of Contents
Advertisement
11. Test the functioning. Mount the Polar Transmitter and wet
its electrodes. Start heart rate measurement by touching
the transmitter's Polar logo with the face of the Polar
Tempo wrist receiver.
Heart rate measurement begins.
In case the heart rate measurement does not start or all
segments do not appear normally, reopen the case and reset
the receiver again.
Point 5.
There is a spare screw attached to the PCBA to be
used in case one of the backcover screws gets lost.
Do not mix the spare screw with the four smaller
screws which hold the battery button!
26
Tempo manual USA 179120.A
26-27
Technical
Specifications
Polar Heart Rate Monitor is designed to indicate the level of
physiological strain and intensity in sports and exercise. No
other use is intended or implied. Heart rate is displayed as
number of heart beats per minute (bpm).
POLAR TRANSMITTER
Battery type:
Built-in Lithium Cell
Battery life:
Average 2500 hours of use
O
O
O
Operating temperature: 14
F to 122
F / -10
C to +50
POLAR WRIST RECEIVER
Battery type:
CR 2032
Battery life:
Average 1 year (2h/day, 7 days/week)
Operating temperature: 14
O
F to 122
O
F / -10
O
C to +50
Accuracy of heart
+
+
rate measurement:
- 1% or
- 1 beats per minute,
whichever larger, definition applies
to steady state conditions
Water resistance:
to 20 meters
1.10.1998, 11:24
O
C
O
C
27
Advertisement
Table of Contents
