Motorola ASTRO XTS 2500 III User Manual page 3

ASTRO Digital XTS 2500
Model III Radio
Quick Reference Card
3-Position
Rotary Switch
_ _ _ _ _ _
On/Off/
Volume Knob
Top Side
Button
_ _ _ _ _ _ _
PTT Button
Side Button 1
_ _ _ _ _ _ _
Side Button 2
_ _ _ _ _ _ _
Home Button
4-Way
Navigation
Button
Write your radio's programmed features on the
dotted lines.
Select a Zone Using the Menu
1 Press U until
2 Press D, E, or F directly below
3 Press U until the zone you desire is shown.
4 Press h to confirm, or press PTT to transmit.
Select a Channel
Method 1: Using the Select Knob
After selecting the desired zone, turn the 16-
position Select Knob to the desired channel.
Method 2: Using the Menu
16-Position
Select Knob
1 Press U until
Top Button
_ _ _ _ _ _ _
2 Press D, E, or F directly below
Speaker/Mic
3 Press U until channel you desire is shown.
4 Press h to confirm, or press PTT to transmit.
Display
Menu Select
Send an Emergency Alarm
Buttons
1 Radio on and press Emergency button. You
see red LED; you hear short, medium-pitched
tone.
Alpha Button
(for future
use)
2 Display shows
Keypad
3 When acknowledgment is received, you hear
four beeps; alarm ends; radio exits
emergency.
Send Silent Emergency Alarm
aPI@
1 Radio on and press Emergency button. You
=21( see no LED; you hear no tone.
.
2 Press PTT.
3
Send an Emergency Call
1
8C6I
8C6I
.
2
3
Answer a Phone Call
1
2
@H@SB@I8` . 3
4
Send a Phone Call
1
2
3
4
Alarm continues until you exit by:
• Press and hold Emergency button
OR
• Press PTT again.
Radio on and press preprogrammed
Emergency button.
Press and hold PTT button. Announce your
emergency into the microphone.
Release PTT to end the call.
Phone-like ringing, LED flashes GREEN,
PHONE CALL and m are displayed
Press Call Response button.
Press PTT button to talk; release to listen
Press to hang up.
h
Press U until QCPI
Press D, E, or F directly below
Press U or V to scroll to phone number.
Press PTT (or Quick Access button, if
programmed) to talk, release to listen.
QCPI
.