Sony Cyber-shot DSC-RX100M3 Instruction Manual page 89

Performing settings on the dedicated screen
Select the desired function in step 2, then press
setting screen for the function appears. Follow the operating guide (A) to perform the settings.
[21] How to Use
Using the "Quick Navi"
You can change the settings directly using the Quick Navi screen when using the viewfinder.
1. Press the DISP (Display Setting) button on the control wheel repeatedly until the screen is set to
[For viewfinder].
2. Press Fn (Function) button to switch the screen to Quick Navi screen.
3. Select the desired function by pressing the up/down/left/right side of the control wheel.
4. Turn the control wheel to select the desired setting.
Confirming the operation method
on the center of the control wheel. The dedicated
Confirming the operation method