Drive - Sony Cyber-shot DSC-RX100M3 Instruction Manual

In [Spd Priority Cont.] mode, the focus is fixed when you press the shutter button halfway down for
the first image, and the focus is fixed after that. However, the exposure value is adjusted for each
image. To use the same exposure for subsequent shots, change the following settings.
The exposure of the first shot is determined when you press the shutter button halfway down. The
exposure setting for the first shot is used for subsequent shots.
Set [ AEL w/ shutter] to [Auto] or [Off].
[79] How to Use
shooting/Self-timer)
Self-timer
The product shoots an image using the self-timer with a 10-second or 2-second delay.
1. MENU → (Camera Settings) → [Drive Mode] → [Self-timer].
2. Select the desired mode using the right/left side of the control wheel.
Menu item details
Self-timer: 10 Sec (default setting):
Sets the 10-second delay self-timer.
When you press the shutter button, the self-timer lamp flashes, a beep sounds, and the shutter operates
after 10 seconds. To cancel the self-timer, press the shutter button again.
Self-timer: 2 Sec:
Sets the 2-second delay self-timer. This reduces the camera-shake caused by pressing the shutter
button.
Hint
Press the /
Press the /
timer.
[80] How to Use
shooting/Self-timer)
Self-timer(Cont)
Continuously shoots the number of images you have set after 10 seconds. You can choose the best
shot from several shots taken.
1. MENU → (Camera Settings) → [Drive Mode] → [Self-timer(Cont)].
Using shooting functions
button of the control wheel to end the self-timer.
button and select
Using shooting functions
Selecting a drive mode (Continuous
(Single Shooting) of the control wheel to release the self-
Selecting a drive mode (Continuous