Zte MF253M Getting Started Manual page 11

Wi-Fi Switch: Enable or disable Wi-Fi.
Multi SSID Switch: Enable or disable multi SSID.
Network Name (SSID): Service Set Identifier (SSID). Enter a string less than 32 characters as
the name for your wireless local area network (Wi-Fi).
Broadcast Network Name (SSID): Disable or Enable (Default) this function. If Enable is
selected, the router broadcasts the SSID, and other devices can detect and connect to it. If
Disable is selected, the other devices cannot detect the router. You can only connect to the
router by manual setting.
AP Isolation: When Enabled is selected, each of your wireless clients will not be able to
communicate with each other. When Disable is selected, each of your wireless clients will be
able to communicate with each other.
Security Mode: The security modes are described below:
1. OPEN: You can authenticate successfully with a SSID, whether it is valid or empty.
2. WPA-PSK/WPA2-PSK: Apply both the WPA-PSK and WPA2-PSK scheme.
3. WPA2 (AES)-PSK: It is the securer version of WPA with implementation of the 802.11i standard.
If the Authentication type is WPA2 (AES)-PSK or WPA-PSK/WPA2-PSK , the bottom part of
the configuration page displays WPA parameters.
Max Station Number: Set the maximum numbers of other devices connecting to your device.
Advanced settings
From the Web UI, click Settings > Wi-Fi Settings > Advanced Settings, you can set Wi-Fi advanced
characters.
11