Omron CJ1W-PNT21 Operation Manual page 51

CX-ConfiguratorFDT Main Window
DTM Group Selection
Window
Note
Additional
Information
Column
Date
Vendor
The left view allows selection of specific groups of device DTMs with common
attributes, e.g. Vendor name, Protocol type etc. If a group is selected, all
device DTMs which belong to that group will be listed in the right view. The
table below lists the possible groups that can be selected.
/i
List Item
Device types
Vendors
Groups
Protocols
1 The sub groups are displayed by cicking on the + sign next to each main group.
2 Selecting the main group displays all devices in the group.
DTM In order to obtain more information of a specific DTM, right-click the DTM in
the list, and select DTM Information from the pop-up menu. This opens a
window with additional DTM information. The figure below provides an
example for the CJ1W-PNT PROFINET IO Controller DTM.
Description
For DTMs, Date is the date associated with the revision. For
GSDML file based slaves, the date listed in this column is the date
the GSDML file was last modified.
The Vendor name is provided by the DTM or the GSDML files.
Description
Sub groups, which can be selected are:
• Communication DTMs, for example PROFINET IO Controller
devices
• Gateways, for example to another network type
• Modular devices
• Other devices, for example slave devices
Sub groups, which can be selected are all available vendors. This
information is provided by each DTM. It allows the user to select a
group of devices from one vendor.
Sub groups are the device types, for example digital I/O, analog I/O
and so on.
Sub groups which can be selected are all the communication
protocols found in the Device Catalogue.
Section 4-2
37