Charging Battery - SoftBank 943SH Owner's Manual

Charging Battery

1

Charging Battery

Battery must be inserted in handset to
charge it.
Charging Battery Outside Japan
. SoftBank Mobile is not liable for problems
resulting from charging battery abroad.
AC Charger
Use specified AC Charger ZTDAA1 (sold
separately) only.
. In this guide, ZTDAA1 is referred to as "AC
Charger."
. Handset and AC Charger may warm while
charging.
Small Light
External Device
Port
Arrows
Port Cover
Charger Connector
Release Tabs
4
1-
1
2
3
AC 100V Outlet
Blades
AC Charger
Open Port Cover as shown
Insert Charger Connector
. With arrows up, insert connector until
it clicks.
Extend blades and plug AC
Charger into AC outlet
. Small Light illuminates red while
charging.
. Small Light goes out when battery is
full.
4
Unplug AC Charger
. Pull AC Charger straight out.
5
Disconnect handset
. Squeeze Charger Connector release
tabs and pull straight out to remove.
6
Fold back blades and
replace Port Cover
When Small Light Flashes
. Battery is unchargeable; may be defective
or simply at the end of its life; replace it.
Important AC Charger Usage Note
. Fold back blades after charging. Do not
pull, bend or twist the cord.