Advertisement
3.1.5 Removing the DVD mechanism (See Fig.7, 8, 9)
(1) Remove the three screws G and one screw H attaching the
DVD MPEG board. (See Fig.7)
G
(2) Disconnect the card wire from DVD MPEG board connect-
ed to connector
SCON3
Fig.8)
(3) Remove the four screws J attaching the DVD MPEG
board. (See Fig.8)
(4) Disconnect the connector wire from Main board connected
to connector
CN100
of the DVD MPEG board. (See Fig.8)
(5) Disconnect the connector wire from DVCC board connect-
ed to connector
CON1
Fig.8)
(6) Disconnect the card wire from Main board connected to
connector
CN2
of the DVD MPEG board. (See Fig.8)
(7) Disconnect the earth wire from Main board connected to
post pin of the Main board. (see Fig.8)
(8) Disconnect the connector wire from USB board connected
to connector
CN82
of the DVD MPEG board. (See Fig.8)
(9) Disconnect the card wires from Main board connected to
connectors
CN8
and
CN9
Fig.8)
J
GND3
CON1
CN100
CN2
CN82
1-8 (No.MB707<Rev.002>)
H
Fig.7
of the UP GRADE board. (See
of the DVD MPEG board. (See
of the DVD MPEG board. (See
SCON3
CN8
CN9
Fig.8
3.1.6 Removing the USB board (See Fig.9)
(1) Disconnect the connector wire from USB board connected
to connector
CON103
(2) Disconnect the card wire from Main board connected to
connector
CON504
(3) Remove the two screws K attaching the USB board.
K
3.1.7 Removing the UP GRADE board (See Fig.10)
(1) Disconnect the card wire from Main board connected to
connector
SCON1
(2) Remove the four screws L attaching the UP GRADE board.
L
J
3.1.8 Removing the FM tuner module (See Fig.11, 12)
(1) Disconnect the card wire from FM tuner module connected
to connector
CON603
CON603
of the Main board.
of the USB board.
CON504
CON103
Fig.9
of the UPGRADE board.
SCON1
Fig.10
of the Main board. (See Fig.11)
Fig.11
L
Advertisement
