Advertisement
3.2.2 Removing the Power cover and Amp cover (See Fig.4,
5, 6, 7)
(1) Remove the five screws C attaching the Cover. (See Fig.4)
(2) Remove the three screws D attaching the Cover. (See
Fig.5)
D
(3) Remove the six screws E attaching the Cover. (See Fig.6)
(4) Lift up the Power cover; remove the two screws F attaching
the Amp cover. (See Fig.7)
1-10 (No.MB707<Rev.002>)
C
Fig.4
Fig.5
E
Fig.6
Fig.7
3.2.3 Removing the Power board (See Fig.8)
(1) Disconnect the power cord connected to connector
the Power board.
(2) Disconnect the connector wires from Amp board connect-
ed to connector
(3) Remove the eight screws G attaching the Power board.
G
3.2.4 Removing the Amp board (See Fig.9, 10)
(1) Remove the three screws H attaching the Back plate. (See
Fig.9)
(2) Remove the four screws J attaching the Amp board. (see
Fig.10)
F
J
CN2
and
CN3
of the Power board.
G
G
CN2
G
Fig.8
H
Fig.9
Fig.10
CN1
of
CN1
CN3
J
Advertisement
