Irrigation Features - Netafim NLC-100SH Installation & Troubleshooting Manual

Irrigation Features
Here are the main features that the NLC utilizes to help you automate your
irrigation:
• Controls up to 100 solenoids attached to valves or relays via the
built‐in connection board and three expansion boards.
• Provides ET corrected irrigation for optimal adjusted water
consumption.
• Measures water flow and raises alarms or halts irrigation on
unexpected flow.
• Allows for 10 independent irrigation programs. In addition there is
a fixed test program that activates all 100 stations in turn.
• A program can activate up to 100 stations in named order.
• Each station can run for up to 17:59:50 (In fact, you can boost this
even further by increasing the "water budget".
• Each program can activate a one or more booster pumps in addition
to the stations.
• Master valves and booster pumps will be activated in parallel in all
connection and expansion boards.
• All programs have 12 start times per day.
• All programs can run simultaneously (to capacity of the transformer
anc connection board).
• You configure each program to run on any selection of days in a 14
day period, or on odd/even dates.
• You can activate one or more valves or programs manually while
one or more programs are running, up to a total of 12
simultaneously running valves.
• A master valve can be selected that will open when any program or
station is run.You typically assign master valve status to the valve
controlling access to municipal water or pumping station.
• Up to 10 moisture sensors that can monitor soil moisture and adjust
irrigation accordingly.
NLC‐100SH Installation and troubleshooting
9