Bluetooth Mode - Grundig TR 2500 DAB+ Manual

BLUETOOTH MODE

Bluetooth device compatibility
Your TR 2500 connects with all Bluetooth devices
that support the A2DP profile including the most
smartphones, laptops and tablets.
Selecting the input source Bluetooth
1
Select the input source DAB with
Alarm«.
– Display: »Bluetooth« and
»Searchin g «.
Pairing Bluetooth device
1
Activate on the Bluetooth device the Bluetooth
function.
2 Start on the Bluetooth device the search func-
tion.
– After a short period of time, your TR2500 is
displayed on the Bluetooth device.
3
Select the TR 2500 on the Bluetooth device
and connect it.
4 Once the Bluetooth device is connected to
your device, the TR 2500 will display »Blue-
tooth« and »Connected«.
Note:
Although the TR 2500 can only stream audio
7
from one device at a time, it is capable of
being paired with up to eight devices.
Connecting a paired Bluetooth
Device
Notes:
You will only need to pair your Bluetooth de-
7
vice with the unit one time.
The next time your Bluetooth device and the
7
TR 2500 are in range of each other, and the
Bluetooth feature is turned on, they will auto-
matically connect.
The TR 2500 will only automatically connect to
7
the last Bluetooth Device it was connected to.
If your paired device does not automatically
7
connect, navigate to the Bluetooth menu on
your device and select the unit from the list.
---------------------------------------------------------------------------------------------------
Play Audio signal from your Blue-
tooth device
1
Start playback on the Bluetooth Device.
2 Adjust the volume using
3
End playback on the Bluetooth Device.
Notes:
Various functions may also be controlled
7
from the TR 2500. Select Playback-Pause
using
to resume playback; select previous title by
»Mode/
pressing »
by pressing
Keep in mind that depending on the used
7
Bluetooth device and the structual conditions
the wireless range can be up to 9 m.
Disconnect the Bluetooth device
1
Switch off the Bluetooth function at the Blue-
tooth device or press at the TR 2500 »Menu«
and confirm with »Select/i«.
– Display changes to: »Searchin g «.
Reconnecting the Bluetooth device
1
If you move out of range or turn off the Blue-
tooth feature on your device, the unit will dis-
connect from your device.
2 To reconnect, simply access the Bluetooth
Manager on your Bluetooth device and select
the TR 2500.
Note:
In case of the registered TR 2500 can-
7
not connect to the Bluetooth device again,
please remove the TR 2500 from the Blue-
tooth device list, search and connect again.
Automatic shutdown
If Bluetooth is selected as input source and no Blue-
tooth device is connected, the TR 2500 switches
automatically to Stand-by mode after 15 minutes.
»– +«.
II« , press
»+5 e »+5
Tuning/Skip«, select next title
r
»Tuning/Skip
ENGLISH
II« again
e
«.
e
25