Models; Bulk Melt (Therm-O-Flow 20 + Therm-O-Flow 200) And Ambient Hoses - Graco PGM Instructions - Parts Manual

Models

Models
NOTE: This manual covers a series change to the PGM system. For systems built prior to 2016, refer to manual
3A0260.
Check the identification (ID) plate for the 6-digit part number of the fluid metering system. Use the following matrix to
define the construction of the system, based on the six digits. For example, Part PG0111 represents a PGM fluid
metering system (PG), with a 6cc system (0), unheated (1), with controls/3m (1), and an EnDure snuff-back (1).
NOTE: To order replacement parts, see Parts section in this manual. The digits in the matrix do not corre-
spond to the Ref. Nos. in the Parts drawings and lists.
PG
Third Digit
First and
Second Digits
Description
PG
(Precision
0
Gear Meter)
2
* PGM Control Center does not include heat controls. Heat loads are configured to be controlled by Therm-O-Flow
Controllers.
Bulk Melt (Therm-O-Flow 20 + Therm-O-Flow 200) and Ambient
Hoses
- 8
3/4 in. - 16 JIC
6 ft None
10 ft 19M402
17J652
15 ft Non
PGM Inlet None
(-16 SAE)
PGM Outlet 124286
(3/4 in. npt)
Valve Inlet 124287
* Indicates PTFE hose, all others Buna-N.
† Indicates swivel.
 Therm-O-Flow part number 98xxxx models.
4
1
0
Fourth Digit
Heat
Size
Description
6cc 1 Unheated
20cc 2 Heated
Hose Diameter
- 12
- 10 1-1/16 in. - 12
7/8 in. - 14 JIC JIC
19M404 None
17J654
19M405 19M412
17J655 17J662
None None
Fittings
None 124238
124235 (90°)
C20595 15M863
C20768 107052
1
Fifth Digit
Controls *
Description
0 No controls
1 Controls / 3m
2 Controls / 6m
3 Controls / 9m
4 Controls / 15m
Non-Heated Hoses
- 16
1-5/16 in. - 12 JIC 3/8 in.
19M416 109163
17J666
19M417 None
17J667
None 109165/
685602*
124239 None
124243 †
124236 (90°)
107127 124290 †
124288 158256 †
2
Sixth Digit
Valve
Description
1 EnDure
snuff-back
6 Remote mount
1/2 in.
626720
(1/2 in. x 5 ft)
215441
511381*
None
124289 †
190451 †
3A5185B