Technical Specifications - Graco PGM Instructions - Parts Manual

Technical Specifications

Technical Specifications
Equipment Name
Volume repeatability
Maximum Fluid Working Inlet Pressure
Maximum Fluid Working Outlet Pressure
Air Supply Pressure Range
Fluid Filtration Recommended
Viscosity Range of Fluids
Wetted Parts
Power Requirements
Power Supply Voltage Range
Minimum Flow Rate
6 cc/rev model
20 cc/rev model
* Maximum Flow Rate
6 cc/rev model
20 cc/rev model
Minimum Dispensed Shot Size
6 cc/rev model
20 cc/rev model
Sound Pressure Level at Maximum Flow Rate
6 cc/rev model
20 cc/rev model
Sound Power Level at Maximum Flow Rate
6 cc/rev model
20 cc/rev model
Operating Temperature Range
Control
Heated Pump
Ambient Pump
Operating Humidity Range
Weight
6 cc/rev model
20 cc/rev model
Controls
Overall Dimensions
6 cc/rev model
20 cc/rev model
Control
* Flow rates and viscosities are general estimates. Flow rates drop as viscosity increases. Fluids are
expected to shear under pressure. New applications or fluids should always be tested to determine
proper line sizes and equipment selections. See your Graco Authorized distributor for other capabilities.
102
US
+/- 1%
1500 psi
2500 psi
60-100 psi (filtration required)
Up to 200 mesh, depending on viscosity
1,000-1,000,000 Centipoise
Stainless Steel, Tool Steel, Chrome, Carbide, Acetal Plastic,
PTFE, Chemical Resistant O-Rings
Full Load: 18.5A, Fuse Rating: 21A
240VAC, 50-60 Hz, single phase
30 cc/min
40 cc/min
480 cc/min
1600 cc/min
8 cc
10 cc
58 dB(A)
72 dB(A)
68 dB(A)
79 dB(A)
40-104°F
40-400°F
40-120°F
10-90% non-condensing
30 lb
60 lb
100 lb
19.75 H x 9.38 W x 6.6 D in.
(50.17 H x 23.83 W x 16.76 D mm)
21.75 H x 9.5 W x 8.9 D in.
(55.25 H x 24.13 W x 22.6 D mm)
30 H x 24 W x 12D in.
(76.2 H x 60.96 W x 30.48 D mm)
Metric
10.3 MPa, 103 bar
17.2 MPa, 172 bar
4-40°C
4-204°C
4-49°C
13.61 kg
27.22 kg
45.36 kg
3A5185B