MARTINDALE VI13800 Instruction Manual page 2

GENERAL SAFETY INFORMATION: Always read before proceeding.
Warning
These instructions contain both information and warnings that are
necessary for the safe operation and maintenance of this product. It is
recommended that you read the instructions carefully and ensure that the contents
are fully understood. Failure to understand and to comply with the warnings and
instructions can result in serious injury, damage or even death.
In order to avoid the danger of electrical shock, it is important that proper safety
measures are taken when working with voltages exceeding 30V AC RMS, 42V AC
peak or 60V DC.
This product must only be used by a competent person capable of interpreting the
results under the conditions and for the purposes for which it has been
constructed. Particular attention should be paid to the Warnings, Precautions and
Technical Specifications. Always check the unit is in good working order before
use and that there are no signs of damage to it. Do not use if damaged.
Where applicable other safety measures such as use of protective gloves, goggles
etc. should be employed.
Please keep these instructions for future reference. Updated instructions and
product information are available at: www.martindale-electric.co.uk
REMEMBER: SAFETY IS NO ACCIDENT
MEANING OF SYMBOLS:
Equipment complies with relevant EU Directives
End of life disposal of this equipment should be in accordance
with relevant EU Directives.
Caution - risk of electric shock
Caution - risk of danger & refer to instructions
Equipment protected by double or reinforced insulation (Class II).
Suitable for live working
Both direct and alternating current
Specification
VI13800
Voltage Indicator
Environmental
Temperature & Humidity (operating & storage):
-10°C to 55°C ≤ 85% R.H.
-10°C to 55°C ≤ 85% R.H.
Altitude: up to 2000m
IP rating: IP54
General
Power: from circuit under test
Dimensions: 205(L) x 67(W) x 27(D) mm
Weight: 130g approx.
Includes: instructions
Safety
Conforms to BS EN 61243-3:2010 CAT IV 600 V, CAT III 1000V
Class II, Double Insulation
Pollution Degree: 2
EMC: Conforms to BS EN 61326-1