Table of Contents
Advertisement
Quick Links
VI13800
VOLTAGE INDICATOR
1 SAFETY INFORMATION
REMEMBER: SAFETY IS NO ACCIDENT
These instructions contain both information and warnings that are
necessary for the safe operation and maintenance of this product. It
is recommended that you read the instructions carefully and ensure
that the contents are fully understood. Failure to understand and
to comply with the warnings and instructions can result in serious
injury, damage or even death.
Particular attention should be paid to the Warnings, Precautions and
Technical Specifi cations.
Please keep these instructions for future reference.
Updated instructions and product information are available at:
www.martindale-electric.co.uk
1.1 Meaning of Symbols and Markings
Caution - risk of danger & refer to instructions
Caution - risk of electric shock
Equipment protected by double or reinforced
insulation (Class II)
Suitable for live working
Both direct and alternating current (AC and DC)
CAT III
(Measurement Category III) is applicable to test and
measuring equipment connected to the distribution part of
the building's low-voltage MAINS installation.
Instruction
Manual
16/12/2013 09:45:29
VI13800 instructions rev2.indd 3
1
ALWAYS READ THESE INSTRUCTIONS BEFORE PROCEEDING
Thank you for buying one of our products. For safety and full
understanding of its benefi ts please read this manual before use.
Technical support is available from 01923 441717 and support@
martindale-electric.co.uk.
CONTENTS
1
Safety Information
1.1 Meaning of Symbols and Markings
2
3
4
5
Warranty
Specifi cations
CAT IV
(Measurement Category IV) is applicable to test and
measuring equipment connected at the source of the
building's low-voltage MAINS installation.
Equipment complies with relevant EU Directives
End of life disposal of this equipment should be in
accordance with relevant EU Directives
For further information on measurement categories visit
www.martindale-electric.co.uk.
2
1
1
3
5
5
5
6
6
7
7
8
9
9
10
10
10
10
10
11
16/12/2013 09:45:29
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for MARTINDALE VI13800
Summary of Contents for MARTINDALE VI13800
- Page 1 4.3 Repair and Service 4.4 Storage Conditions Warranty Specifi cations I13800 instructions rev2.indd 2 16/12/2013 09:45:29 VI13800 instructions rev2.indd 3 16/12/2013 09:45:29 1 SAFETY INFORMATION CAT IV (Measurement Category IV) is applicable to test and measuring equipment connected at the source of the REMEMBER: SAFETY IS NO ACCIDENT building’s low-voltage MAINS installation.
- Page 2 2.2 Description Voltage Polarity indication The Martindale VI13800 is a development of the VI13700 which thresholds is widely specifi ed to ensure the electrical safety of users when proving dead i.e. not hazardous live. It is constructed in accordance with the latest safety standards.
- Page 3 4.3 Repair and Service as defi ned by the test for interference voltage in the standard EN There are no user serviceable parts in this unit. Return to Martindale 61243-3:2010. Electric if faulty. Our service department will quote promptly to repair If there is any doubt as to whether a voltage indication is hazardous any fault that occurs outside the guarantee period.
- Page 4 Before the unit is returned, please ensure that you have checked the 5. WARRANTY AND LIMITATION OF LIABILITY unit. This Martindale product is warranted to be free from defects in material and workmanship under normal use and service. The warranty period is 4.4 Storage Conditions 2 years and begins on the date of receipt by the end user.
Need help?
Do you have a question about the VI13800 and is the answer not in the manual?
Questions and answers