Pride Mobility raptor series Owner's Manual page 9

Turn Signal Buttons
„ Switch the turn signal button in the appropriate direction to activate it. The turn signal lights will flash
on your scooter.
„ After toggling the turn signal switch, it will return to the center neutral position.
„ Press down on the turn signal button in the neutral position to ensure that the turn signal deactivates
after 10 to 15 seconds.
NOTE: The turn signals are timed to shut off after 10 to 15 seconds only after the turn signal
button has been pressed in the center position. If this button is not pressed, the turn signal will
remain on.
Lights Switch
The lights switch offers both a running light and a full light option.
„ To activate the scooter's running lights, switch the headlights activation switch to the center position.
The tail lights and the low front light will turn on.
„ To activate the full lights, switch the headlights activation switch to the far left position. In addition to
the low light and tail lights, the headlight will engage.
„ To turn the lighting system off, switch the activation switch back to the far right position.
High Beam/Low Beam Switch
When the Lights Switch is in the full light position, your scooter will engage the high beam or the low
beam headlight.
„ Switch the High Beam/Low Beam Switch up to engage the high beam, or down to engage the low beam.
WARNING! Scooter users are required to use their lights when visibility is restricted—day or night.
LCD SCREEN
The LCD screen offers easily intuited feedback information. See figure 2.
1
Figure 2. LCD Screen
Raptor
I I . Y O U R S C O O T E R
IDENTIFICATION KEY
1. Speed
2. Battery Condition Indicator
3. Odometer/Tripometer
3
2
9