Download Print this page

Kenmore 790.4028* Use And Care Manual page 10

Wall oven

Advertisement

Oven Controls
Changing Temperature Display (F or C)
The electronic oven control is set to display Fahrenheit (F) when
shipped from the factory. The display may be changed to show
either Fahrenheit or Celsius (C) oven temperatures.
To change temperature display:
Broil
1.
Press
. The display will show
2. Press and hold
until
Broil
3. Press and hold
until
4. Press either
or
5. Release key when desired mode is displayed.
6. To accept selection, press any control key once. The display
will return to the time of day.
Important note:
The temperature display mode cannot be changed when the
oven is set for cooking.
Oven Lockout
The control may be programmed to lock the oven control keys
and oven door.
To activate oven lockout:
1.
Be sure the door is completely closed.
2. Press and hold
STOP
STOP
display.
3. The DOOR LOCKED indicator light will flash while the
motor driven door latch begins locking the oven door. Do
not open the door during this time. Allow 15 seconds for the
door to completely lock. Once oven door is locked, the time
of day will appear in the display.
4. To cancel the oven lockout feature, press STOP and hold for
3 seconds. The control will unlock the oven door and resume
normal operation.
Do not open the oven door while the indicator
light is flashing. If any control pad is pressed with the oven lock
feature active, Loc will appear in the display until the control
pad is released.
— —
.
HI
appears in display.
F
C
or
appears in the display.
F
C
to change to
or
.
for 3 seconds. Loc will appear in the
Operating the Oven Light
The oven light will automatically turn on when the oven door is
opened. Press the rocker switch marked OVEN LIGHT on the left
side of the control panel to turn the oven light on or off
whenever the oven door is closed.
Figure 2: Oven light switch
The oven light is located at the upper right rear corner of the
oven interior and is covered with a glass shield. The glass shield
protects the bulb from high temperatures and should always be
in place when the oven is in use.
Leave oven light off while baking.
To replace the interior oven light see
Lights"
on
page
18.
Silent or Audible Control Mode
When selecting a function, an audible tone is heard each time a
key is pressed. If desired, the control can be programmed for
silent operation.
To set the controls for silent operation, press and hold Delay
Start for 6 seconds. The control will beep once, then release the
key.
To return to non-silent operation, press and hold Delay Start
again for 6 seconds until the control beeps once.
10
"Replacing the Oven

Advertisement

loading