Advertisement
Auto mode - This menu will let you select the desired auto mode
Press MENU, press the UP or DOWN button until "Auto" is displayed, press ENTER.
There are 11 auto modes, press the UP or DOWN button to select the desired mode, press ENTER to
confirm.
Channel mode - Select the desired channel mode
Press MENU, press the UP or DOWN button until "Chnd" is displayed, press ENTER
"X Ch" will now be displayed, ("X" represents the displayed channel mode). Press the UP or DOWN button
to find the desired channel mode. Press ENTER to confirm.
DMX Address - Set the DMX address
Press MENU, press the UP or DOWN button until "Addr" is displayed, press ENTER.
"Axxx" will now be displayed, ("xxx" represents the displayed address). Press the UP or DOWN button to
find the desired address. Press ENTER to confirm
Pasd - Password function switch
Press MENU, press the UP or DOWN button until "Pasd" is displayed, press ENTER.
Set the password for the password function. Password is MENU – UP – DOWN – ENTER
Tenp: Temperature
rEST: Reset
Info - Will display the software version and working time of the unit.
Press MENU, press the UP or DOWN button until "Info" is displayed, press ENTER.
The software version of the unit will be displayed. Press MENU to leave this function
Slave mode - In this mode the unit functions as a slave
Press MENU, press the UP or DOWN button until "Slav" is displayed, press ENTER. "Sla" will now be
displayed, Slave mode is confirmed. The unit will now act as a slave in Auto, sound and chase mode.
OPERATING INSTRUCTIONS
DMX connection.
Master / Slave connection.
- 5 -
Advertisement
