Thank you for purchasing one of our products. Before you use this product please read these instructions
carefully to enjoy optimal performance and a longer service life.
UNPACKING INSPECTIONS
Unpacking instructions
•
Please unpack the carton and check the goods carefully when you receive it , if you discover any
packing damage, shortage or quality problems, please notify the shipper and reject the goods.
•
Before using this product, please read the instructions carefully and store them in a safe place for
future reference.
SAFETY INSTRUCTIONS
•
Always connect this product to a grounded circuit to avoid the risk of electrocution.
•
Never put tiny metal objects such as a screwdriver, iron wire, etc. into this product in case of a short
circuit .
•
Please make sure that the voltage of the outlet to which you are connecting this product is within
the range stated on the decal or rear panel of the product.
•
Avoid physical damage to the product during transportation. Never carry this product from the
power cord or any moving part . Always use the hanging / mounting bracket or the handles.
•
This product is for indoor use only. To avoid risk of fire or shock, do not expose this product to rain
or moisture.
•
Never pull or tug on the cord and change it for another one, stop using it when it is damaged or
becomes hot .
•
Stop using the product once there are sparks when connecting it to the power socket.
•
Do not operate this product with wet hands and never place it near water or any other liquids.
•
Make sure there are no flammable materials close to the unit while operating. Always install it in a
location with adequate ventilation.
•
When the original lightning source is damaged, do not replace it with a lightning source which has
different specifications and ratings.
•
Always disconnect this product from the power source before replacing the light source or the fuse.
•
The maximum ambient temperature is 40°C(104°F).
•
Never clean the unit with water, thinner or any other dissolving agent .
•
Stop using the product in case of a serious operating problem and send it to our maintenance agent
immediately. Never get this product repaired by non-professional workers.
•
Avoid direct eye exposure to the light source while this product is on.
•
Never clean the fixture by water, thinner or other dissolved agent .
•
Stop using the product in case of a serious operating problem and send it to our maintenance agent
immediately. Never repair by non-professional workers .
•
Avoid direct eye exposure to the light source while the product is on.
- 2 -