Receiving And Transmitting - Icom IC-F51 Instruction Manual

■ Receiving and transmitting

NOTE: Transmitting without an antenna may damage the trans-
ceiver. See page 1 for antenna attachment.
Receiving:
q Rotate [VOL] to turn power ON.
w Push [ ] or [
e When receiving a call, adjust the audio output level to a comfort-
able listening level.
Transmitting:
Wait for the channel to become clear to avoid interference.
q While holding down [PTT], speak into the microphone at a nor-
mal voice level.
• When a tone signalling system is used, the call procedure as de-
scribed to the left may be necessary.
w Release [PTT] to return to receive.
IMPORTANT: To maximize the readability of your signal.
1. Pause briefly after pushing [PTT].
2. Hold the microphone 5 to 10 cm from your mouth, then speak
into the microphone at a normal voice level.
] to select a channel.
CONVENTIONAL OPERATION
3
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
14