Brake Hose - Subaru LEGACY 2004 Service Manual

BRAKE

12.Brake Hose

A: REMOVAL
1. FRONT BRAKE HOSE
1) Separate the brake pipe from brake hose using a
flare nut wrench.
2) Remove the clamp, bolt at strut mount, and
union bolt.
(1) Brake hose
(2) Brake pipe
2. REAR BRAKE HOSE
1) Remove the union bolt from rear brake caliper.
(1)
(1) Brake hose
2) Separate the brake pipe from brake hose using a
flare nut wrench.
Brake Hose
(1)
(2)
BR-00095
BR-00348
BR-40
3) Remove the clamp and remove the brake hose.
(2)
(1)
(1) Brake pipe
(2) Brake hose clamp
(2)
(3)
(1) Brake pipe
(2) Brake hose
(3) Brake hose clamp
B: INSTALLATION
1. FRONT BRAKE HOSE
1) Secure the brake hose to strut mount.
Tightening torque:
⋅
33 N m (3.4 kgf-m, 24.3 ft-lb)
2) Install the brake hose to caliper using a new gas-
ket.
Tightening torque (Union bolt):
⋅
18 N m (1.8 kgf-m, 13.0 ft-lb)
3) Position the disc in straight-forward direction and
route the brake hose through the hole in bracket on
wheel apron side.
BR-00349
(1)
BR-00350
BR-00021