Denso Intelligent Tester II Operator's Manual page 53

4 Diagnostics Functions
NOTE
If a message screen appears, touch
check screen and select the vehicle to be diagnosed.
Manual Vehicle Selection
1.
Enter the data on the vehicle data input screen to specify the vehicle to be diagnosed.
When you touch each data button, a data select screen is displayed.
Select the data of the vehicle to be diagnosed from the data select screen.
OK
Touch
Operation from this point is the same as when selecting an automatic vehicle.
NOTE
The Intelligent Tester II communicates with the vehicle computer (ECU) even in the case of Manual
Vehicle Selection. Connect the Intelligent Tester II with the vehicle before touching
Reference: Page 14 Connecting to the Vehicle (Chapter 1. Before Use/Connection)
Vehicle data input screen
ACTIVE KEY
Previous Vehicle
Email: sales@obd2express.co.uk Skype: obd2express.co.uk
OK
and the system select screen is displayed.
T00084E
You can select the manual select data of the previous ten selected vehicles.
to close the window. Touch
T00085E
Data select screen
- 44 -
Manual on the onboard/offboard
Manual
.
Previous vehicle select screen
T00086E