Data Storage Setting Function (Memory Select) - Denso Intelligent Tester II Operator's Manual

3 Default Settings

Data Storage Setting Function (Memory Select)

The data storage setting function sets the storage location data.
Either internal memory or PC Card 1 can be selected.
Internal Memory : Internal memory
PC Card1: External memory card 1
The storage capacity is displayed after the data storage location has been selected.
ACTIVE KEY
OK Activates the selected settings.
Cancel
Returns to the previous settings.
Button Setting Functions (Button Configuration)
The button setting functions set short cuts to the left and right function keys on the
main unit, and set image storage for the right function key.
Short cut key settings determine where the screen returns to when the left or right
function key on the main unit is pressed.
The image storage setting switches the image storage function ON/OFF.
The image storage function can store the image being displayed as a file when the
right function key on the main unit is pressed.
Up to 2 such image files can be stored. The 3rd image file will be written over the
oldest file.
The image storage setting returns to the default value (OFF) when the Intelligent
Tester II power goes OFF. This setting is always OFF immediately after the
Intelligent Tester II starts up. To enable this function, you must set it to ON after
startup.
ACTIVE KEY
OK Activates the selected settings.
Cancel
Returns to the previous settings.
Email: sales@obd2express.co.uk Skype: obd2express.co.uk
- 41 -
T00079E
T00080E