Denso Intelligent Tester II Operator's Manual page 111

6 Measurement Functions
Trigger channel setting
Switches the trigger channel.
The selected button is displayed in blue.
ACTIVE KEY
Ch1 Sets the trigger channel to "Ch1".
Ch2
Sets the trigger channel to "Ch2".
Trigger mode setting
Sets the trigger mode.
The selected button is displayed in blue.
The meanings of the trigger modes are as follows.
Auto
The waveform is displayed regardless of the trigger specification.
Norm
The waveform is only displayed when the specified trigger is detected. (The waveform is updated when the next trigger
is detected.)
Single
The waveform from when the specified trigger is first detected is held (the display is fixed).
ACTIVE KEY
Auto
Sets the trigger mode to [Auto].
Norm
Sets the trigger mode to [Norm].
Single
Sets the trigger mode to [Single].
Trigger level setting
Sets the trigger level.
The set trigger level is displayed to the left side of the button.
ACTIVE KEY
Raises the trigger level.
Lowers the trigger level.
Email: sales@obd2express.co.uk Skype: obd2express.co.uk
- 102 -
T00222E
T00223E
T00224E