Denso Intelligent Tester II Operator's Manual page 28

1 Before Use
Connecting the voltage measurement tester probe
CAUTION
When connecting the probe to the Intelligent Tester II, gently insert it straight into the connector.
Inserting the probe at a slant can break the connector pins.
The tip of the probe is sharp, so handle it carefully.
NOTE
In addition to the datalink cable, the optional cigarette lighter cable or battery cable can also be used to
ensure correct measurement.
Email: sales@obd2express.co.uk Skype: obd2express.co.uk
- 19 -
T00042E