Frequently Asked Questions; I Cannot See My Wi-Fi (Wireless Network Name/Ssid) - NetComm Wireless NF18ACV Troubleshooting Manual

Wireless troubleshooting guide

Hide thumbs Also See for NF18ACV:

User manual (93 pages)

Quick start manual (13 pages)

Setup manual (8 pages)

Table Of Contents

Table of Contents

Frequently Asked Questions

I cannot see my Wi-Fi (Wireless network name/SSID) ...................................................................................................................................................... 3

A Wi-Fi client (Laptop/mobile/Pad) cannot connect to Wireless network ........................................................................................................................ 4

I am connected to Wi-Fi network but unable to browse internet ................................................................................................................................... 14

Should I choose 2.4 GHz or 5 GHz? ................................................................................................................................................................................. 15

I cannot see my Wi-Fi (Wireless network name/SSID)

Navigate to Wireless > 2.4 GHz/5 GHz > Basic. Untick "Enable Wireless" and press Apply/Save. Again, tick "Enable

Wireless" and press Apply/Save.

If you still cannot scan/see the Wi-Fi network name in your client devices, take backup, re-flash the firmware, factory

reset the device and reconfigure the modem again.

NF18ACV FAQs

3 of 15

Table of Contents