Using The Personocall Voip Utility - Plantronics .Audio 655 User Manual

Using the PerSonoCall VoIP Utility

1. Connect your computer to the bottom
of the charging base using the USB
cable. The smaller end of the cable
goes into the base; the larger end
goes into a USB port on your
computer.
. Make sure your computer VoIP call
software (Skype or Yahoo! Voice) is
running.
Note: If you have several USB ports on your computer, we recommend you
always use the same one to connect Calisto.
3. Do one of the following:
– To place a call: Place the call as you normally
do using your VoIP software. Your handset
screen displays "Calling Internet."
Tip: You must dial calls from the VoIP software on your
computer; you cannot dial VoIP calls from the handset.
– To receive a call: When a VoIP call arrives,
the handset has a distinctive VoIP ring and
your handset screen displays "Internet
Incoming Call." Answer the call as you normally
would using the handset, speakerphone, or
headset (see "Receiving calls" on page 9).
– To end a call: End a VoIP call in the same
way you normally would using the handset or
the headset (see "Ending calls" on page 11).
Tip: When you are on a VoIP call, you can talk as you normally would from
the handset, or transfer the call between the handset, speakerphone, and
headset (see "Switching calls between handset, headset, and speakerphone"
on page 10).
Page 39