Introduction; Overview - HP NC370T User Manual

Overview

The HP NC370T PCI-X Multifunction Gigabit Server Adapter is a high-performance, single
port, Ethernet adapter that delivers up to 1000 Mb/s Ethernet over twisted-pair (copper)
cabling. For best performance, install the adapter in a 64-bit/133 MHz, PCI-X slot. The
NC370T adapter has a fully integrated controller capable of auto-negotiating a link at 10,
100, or 1000 Mb/s. The network connection is made through an RJ-45 connector. LED
indicators show the speed and activity of the link once it has been established.
The NC370T PCI-X Multifunction Gigabit Server Adapter is a supported option for selected
HP ProLiant servers. In addition to features that have shipped with other server adapters, the
NC370T adapter also supports Receive Side Scaling, TCP/IP Offload Engine (TOE), iSCSI,
and Remote Direct Memory Access (RDMA). For details about each of these advanced
features and for other information regarding the latest functionality, features, and operating
system support for this server adapter, refer to the networking page at
(http://h18004.www1.hp.com/products/servers/networking/index-nic.html).
HP NC370T PCI-X Multifunction Gigabit Server Adapter User Guide
1

Introduction

1-1