Global Array Manager (Gam) Client; In Case Of Problems - Mylex PCI to Ultra SCSI RAID Controllers DAC960PG Installation Manual
Pci to ultra scsi raid controllers
Hide thumbs
Also See for PCI to Ultra SCSI RAID Controllers DAC960PG:
- Quick installation manual (16 pages) ,
- Installation manual (106 pages)
Table of Contents
Advertisement
Global Array Manager (GAM) Client
The controller can be configured using Global Array Manager Client. GAM
Client can also be used from the server or a system client to monitor status
and verify data integrity of disks connected to the controller while the
system and disks are running.
For details on how to install and run GAM Client, refer to the Global Array
Manager Client Software Installation Guide and User Manual.
In Case of Problems
If problems are encountered during start-up, check the following:
• Check SCSI cabling for loose connections, pin mismatches (make sure
pin 1 on the cable matches pin 1 on the connector), bent pins, and
damaged or crossed cables.
• Check cable length. This includes internal bus lengths in enclosures.
• Check termination.
• Check SCSI IDs on all drives.
Manual No. 775012
Controller Start-up
4-5
Advertisement
Table of Contents
Need help?
Do you have a question about the PCI to Ultra SCSI RAID Controllers DAC960PG and is the answer not in the manual?